Specifications

Cutterbar

Cutterbar protection ShearHub
Lubrication Hy-Gard oil
Cutterbar oil check Combination sight glass, drain plug
Number of disks 10
Number of knives 20
Disk speed 2,650 rpm
Disk drive Gear
Type John Deere
Angle range 2-8 degree (angle)
Angle adjustment Manual or hydraulic
Adjustable gauge shoes Yes
Oil reservoir capacity 11.4 L
12 U.S. qt
Cutting width 4.9 m
16 ft
Cutting height 1.6-11.7 cm
0.63-6.7 in.
Knife tip speed 307 km/h
191 mph

Dimensions

Standard tires 31x13.5 15 8PR
Weight, roll conditioner With Urethane roll conditioner: 4,010 kg
8,840 lb
With V-10 steel roll conditioner: 4,091 kg
9,020 lb
With Tri-Lobe roll conditioner: 4,148 kg
9,145 lb
Transport length 9.9 m
32.5 ft
Transport width 5.03 m
16.5 ft

Key Specs

Optional hitch Drawbar swivel
Standard hitch Rockshaft swivel
PTO speed 1000 rpm
Hydraulic pressure required 17,237 kPa
2,500 psi
Transport width 5.03 m
16.5 ft
Cutterbar - cutting width 4.9 m
16 ft
1000 rpm 1-3/8 in. PTO 120-210 hp
89-157 kW
Number of disks/knifes 10
20

Rolls conditioner

Speed 1000 rpm
Drive Telescoping shaft
Type of material Urethane or Steel
Design Urethane: Recessed cleat, Steel Intermeshing flutes (V-10 and Tri-Lobe)
Width 269 cm
105.5 in.
Diameter 25.3 cm
9.96 in.

Tractor equipment

Tractor connection 21 spline
Standard hitch Rockshaft swivel
Optional hitch Drawbar swivel
Hydraulic pressure required 17,237 kPa
2,500 psi

Additional information

Date collected August 24, 2020