Specifications

Capacities

Diesel exhaust fluid (DEF) tank 37.2 L
9.8 U.S. gal.
Crankcase oil volume 1500 MFWD: 27.6 L
7.3 U.S. gal.
ILS: 25.8 L
6.8 U.S. gal.
Transmission-hydraulic system 1500 MFWD: 184.6 L
48.8 U.S. gal.
ILS: 207.2 L
54.7 U.S. gal.
Fuel tank 727 L
192 U.S. gal.
CTIS: 651 L
172 U.S. gal.
Cooling system 42.3 L
11.2 U.S. gal.

Dimensions

Wheelbase MFWD: 3,080 mm
121.3 in.
ILS: 3,050 mm
120.1 in.
Drawbar clearance 376 mm
14.8 in.
Overall length 6,636 mm
261.3 in.
Front axle center MFWD: 686 mm
27 in.
ILS: 590 mm
23.2 in.

Drawbar

Maximum vertical load Dependent on drawbar position: 1837 to 2700 kg
4050 to 6000 lb
Optional: 2,245 kg
4,950 lb
4,990 kg
11,000 lb
Drawbar category Standard: Category 4
Optional: Category 4 with heavy-duty support

Electrical system

Battery options 12 V
Total cold cranking amps 1,850 CCA
Alternator size Standard: 200 amp
Optional: 330 amp
Type of bulb in headlight (Halogen, Zenon, LED) Standard: halogen, 65 W
Available: LED
Working lights Standard: 18 halogen
Available: 18 LED
22 LED

Engine performance

Power boost 10 percent
PTO torque rise 40 percent
Rated power ECE-R120: 250 kW
340 hp
Rated PTO power (hp SAE) 211 kW
284 hp
Engine peak torque At 1600 rpm: 1592 Nm
1174 lb-ft
Maximum engine power ECE-R120: 275 kW
374 hp

Engine specifications

Cylinders liners Wet-sleeve
Rated speed 2100 rpm
After treatment type Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR)
Emission level Final Tier 4
Aspiration Single, variable geometry turbo; air-to-air aftercooling and cooled exhaust gas recirculation
Engine family MJDXL09.0333
Description John Deere PowerTech 9.0 L (B20 diesel compatible)
Engine type In-line six, four valve
Displacement 9.0 L
549 cu in.

Front axle

Front axle differential lock 1500 Series MFWD: Full-locking electrohydraulic
ILS: Full-locking electrohydraulic
Type Standard: ILS
Optional: 1500 Series MFWD

Front hitch

PTO speed 1,000 PTO rpm at 2000 engine rpm
Category Category 3N
Front power take-off (PTO) 44 mm (1.75 in.) 20 spline, 1000 rpm
35 mm (1.375 in.) 21 spline, 1000 rpm
35 mm (1.375 in.) 6 spline, 1000 rpm (available dependent on location)
Standard lift capacity Category 3N ground-engaging front hitch: 5200 kg
11,464 lb

Hydraulic system

SCV control Electronic
Type Closed-center, pressure/flow compensated system with load sensing
Available flow at front SCVs 96 L/min
25 gpm
Available flow at a single rear SCV 1.3-cm (1/2-in.) couplers: 132 L/min
35 gpm
1.9-cm (3/4-in.) coupler: 159 L/min
42 gpm
Pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 318 L/min
84 gpm
Number of rear selective control valves (SCVs) Standard: 1.3-cm (1/2-in.) ISO couplers: 4
Optional: 1.3-cm (1/2-in.) ISO couplers: 5 and 6 available
1.9-cm (3/4-in.) ISO coupler: 1

Key Specs

Rated PTO power (hp SAE) 211 kW
284 hp
Transmission type Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km
24.9 mph
Optional: e23 PowerShift with Efficiency Manager 50K, 50 km/h
31 mph
John Deere AutoPowr™ IVT™ 40K, 0.05-42 km/h
0.03-26 mph
John Deere AutoPowr IVT 50K, 0.05-50 km/h
0.03-31 mph
Engine description John Deere PowerTech™ 9.0 L (B20 diesel compatible)
Engine displacement 9.0 L
549 cu in.
Rear hitch category (SAE designation) Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitch point: 9072 kg
20,000 lb
Optional: Category 4N/3 at 610 mm (24 in.) behind hitch point: 6803 kg
15,000 lb
Hydraulic pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 318 L/min
84 gpm
Rated engine power ECE-R120: 250 kW
340 hp
Base machine weight ILS™/e23: 12,700 kg
28,000 lb
Maximum engine power ECE-R120: 275 kW
374 hp

Loaders

Loader 700M

Miscellaneous

Country of manufacture USA

Operator station

Cab suspension Optional
Instructional seat Standard
Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Inner cab volume 3.24 m3
114 cu ft
Display Standard: 4600 Generation 4 CommandCenter™: 25.4 cm
10 in.
Seat Degree of seat swivel, left hand
25 degree (angle)
Degree of seat swivel, right hand
40 degree (angle)
Standard: air suspension
Optional: ActiveSeat™ II
Cab glass area 6.52 m2
70.18 sq ft

Precision AG

Remote diagnostics JDLink hardware standard
Telematic JDLink™ hardware standard, activations, and Ethernet harnesses (availability dependent upon destination)
Guidance Integrated AutoTrac™

Rear axle

Final drive type Inboard planetary three pinion
Rear differential lock Full-locking electrohydraulic
Type Standard: Rack-and-pinion, double flat, or flange axles
Optional: Long, dual taper hub: Diameter: 110 x 3010 mm
4.33 x 118.5 in.
Short, double flat axle with single taper hub: Diameter: 120 x 2550 mm
4.72 x 100.4 in.

Rear hitch

Sensing type Electrohydraulic
Rear axle differential lock Electrohydraulic
Maximum lift capacity behind lift points Standard (at 610-mm [24-in.] behind hitch point): 12,124 kg
26,729 lb
Hitch category (SAE designation) Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitch point: 9072 kg
20,000 lb
Optional: Category 4N/3 at 610 mm (24 in.) behind hitch point: 6803 kg
15,000 lb

Rear power take-off (PTO)

Multispeed PTO option availability Available: 45-mm (1.75-in.), 1000-rpm and 1000E economy rpm PTO, in-cab shiftable
PTO actuation Electrohydraulic with adjustable modulation
Type Independent
Standard: 44 mm (1.75 in.) 20-spline, 1,000 rpm
Optional: 44 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35 mm (1.375 in.) 540/1000 rpm
44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm
Engine rpm (at rated PTO speeds) IVT: 1,000 PTO rpm at 2,000 engine rpm, 1,000 ECO PTO at 1594 engine rpm, 540 PTO rpm at 1,814 engine rpm
e23 PowerShift: 1,000 PTO rpm at 1,995 engine rpm, 1,000 ECO PTO at 1,590 engine rpm, 540 PTO rpm at 1,810 engine rpm

Serviceability

Interval for engine oil change 500 hours
Interval for engine coolant change 6,000 hours
Interval for hydraulic/transmission oil change 1,500 hours

Steering

Type Standard: Hydraulic power-steering with electric pump back-up
Optional: ActiveCommand Steering 2 (ACS™ 2) with electronic backup pump

Tires

Central Tire Inflation System (CTIS) Optional
Turning radius without brakes 1500 with 420/850R34 Group 43 tires at 182.9-cm (72-in.) spacing: 5.71 m
18.7 ft
ILS with 480/70R34 Group 43 tires at 184.2-cm (72.5-in.) spacing: 6.45 m
21.2 ft
Wheel tread range 1500 Series MFWD: 1524-3657 mm
60-144 in.
ILS: 1524-3657 mm

Transmission

Type Standard: e23 PowerShift with Efficiency Manager 40K, 40 km/h
24.9 mph
Optional: e23 PowerShift with Efficiency Manager 50K, 50 km/h
31 mph
John Deere AutoPowr IVT 40K, 0.05-42 km/h
0.03-26 mph
John Deere AutoPowr IVT 50K, 0.05-50 km/h
0.03-31 mph

Weight

Maximum permissible weight 20,000 kg
44,100 lb
Maximum ballast level 20,000 kg
44,100 lb
Base machine weight ILS™/e23: 12,700 kg
28,000 lb

Additional information

Date collected 12 January 2022