Specifications

Capacities

Cooling system 42.3 L
11.2 U.S. gal.
Fuel tank 924 L
244 U.S. gal.
Transmission-hydraulic system 1930-mm and 2032-mm (76-in. and 80-in.) tread: 250 L
66.1 U.S. gal.
2235-mm and 3048-mm (88-in. and 120-in.) tread: 260.6 L
68.8 U.S. gal.
Diesel exhaust fluid (DEF) tank 37.2 L
9.8 U.S. gal.
Crankcase oil volume 26.6 L
7 U.S. gal.

Dimensions

Wheelbase 3235 mm
127.36 in.

Drawbar

Drawbar category Standard: Category 4
Optional: Category 4 with heavy-duty support
Maximum vertical load Standard: 2245 kg
4950 lb
Optional (dependent on drawbar position): 4990 kg
11,000 lb

Electrical system

Total cold cranking amps 1,850 CCA
Battery options 12 V
Working lights Standard: 18 halogen
Available: 18 LED
22 LED
Type of bulb in headlight (Halogen, Zenon, LED) Standard: halogen, 65 W
Available: LED
Alternator size Standard: 200 amp
Optional: 330 amp

Engine performance

PTO torque rise 40 percent
Power boost 10 percent
Rated PTO power (hp SAE) 231 kW
310 hp
Rated power ECE-R120: 272 kW
370 hp
Maximum engine power ECE-R120: 299 kW
407 hp
Engine peak torque At 1600 rpm: 1732 Nm
1277 lb-ft

Engine specifications

Aspiration Dual turbochargers, variable geometry turbo with fixed geometry turbo in series; air-to-air aftercooling and cooled exhaust gas recirculation
Rated speed 2100 rpm
Cylinders liners Wet-sleeve
Emission level Final Tier 4
After treatment type Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR)
Description John Deere PowerTech 9.0 L (B20 diesel compatible)
Engine family MJDXL09.0333
Engine type In-line six, four valve
Displacement 9.0 L
549 cu in.

Front axle

Type 1700 Series MFWD
Front axle differential lock Full-locking electrohydraulic (actuated at same time as rear diff-lock)

Hydraulic system

SCV control Electronic
Type Closed-center, pressure/flow compensated system with load sensing
Available flow at a single rear SCV 1.3-cm (1/2-in.) couplers: 132 L/min
35 gpm
1.9-cm (3/4-in.) coupler: 159 L/min
42 gpm
Number of rear selective control valves (SCVs) Standard: 1.3-cm (1/2-in.) ISO couplers: 4
Optional: 1.3-cm (1/2-in.) ISO couplers: 5 and 6 available
1.9-cm (3/4-in.) ISO coupler: 1
Pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 318 L/min
84 gpm

Key Specs

Base machine weight e23, 457-mm (18-in.) front/rear and 3048-mm (120-in.) tread: 19,600 kg
43,300 lb
Rear hitch category (SAE designation) Standard: Category 4N/3 at 610 mm (24 in.) behind hitch point: 6,803 kg
15,000 lb
Optional: Category 4N/3 at 610 mm (24 in.) behind hitch point: 9,072 kg
20,000 lb
Transmission type Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h
24.9 mph
Optional: John Deere AutoPowr™ IVT™ 40K, 0.05-42 km/h
0.03-26 mph
Rated PTO power (hp SAE) 231 kW
310 hp
Maximum engine power ECE-R120: 299 kW
407 hp
Rated engine power ECE-R120: 272 kW
370 hp
Hydraulic pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 318 L/min
84 gpm
Engine description John Deere PowerTech™ 9.0 L (B20 diesel compatible)
Engine displacement 9.0 L
549 cu in.

Miscellaneous

Country of manufacture USA

Operator station

Instructional seat Standard
Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Cab suspension Standard: four-post cab suspension
Seat Degree of seat swivel, left hand
25 degree (angle)
Degree of seat swivel, right hand
40 degree (angle)
Standard: air suspension
Inner cab volume 3.24 m3
114 cu ft
Cab glass area 6.52 m2
70.18 sq ft
Display Standard: 4600 Generation 4 CommandCenter™: 25.4 cm
10 in.

Precision AG

Remote diagnostics JDLink hardware standard
Guidance Integrated AutoTrac™
Telematic JDLink™ hardware standard, activations, and Ethernet harnesses (availability dependent upon destination)

Rear axle

Final drive type Inboard planetary
Type Flange
Rear differential lock Full-locking electrohydraulic

Rear hitch

Sensing type Electrohydraulic
Hitch category (SAE designation) Standard: Category 4N/3 at 610 mm (24 in.) behind hitch point: 6,803 kg
15,000 lb
Optional: Category 4N/3 at 610 mm (24 in.) behind hitch point: 9,072 kg
20,000 lb
Maximum lift capacity behind lift points Standard (at 610-mm [24-in.] behind hitch point): 12,124 kg
26,729 lb

Rear power take-off (PTO)

PTO actuation Electrohydraulic with adjustable modulation
Multispeed PTO option availability Available: 45-mm (1.75-in.), 1000-rpm and 1000E economy rpm PTO, in-cab shiftable
Engine rpm (at rated PTO speeds) IVT: 1,000 PTO rpm at 2,000 engine rpm, 1,000 ECO PTO at 1594 engine rpm, 540 PTO rpm at 1,814 engine rpm
e23 PowerShift: 1,000 PTO rpm at 1,995 engine rpm, 1,000 ECO PTO at 1,590 engine rpm, 540 PTO rpm at 1,810 engine rpm
Type Independent
Standard: 44 mm (1.75 in.) 20-spline, 1,000 rpm
Optional: 44 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35 mm (1.375 in.) 540/1000 rpm
44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm

Serviceability

Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine oil change 500 hours
Interval for engine coolant change 6,000 hours

Steering

Type Standard: Hydraulic power-steering with electric pump backup

Tires

Turning radius without brakes With 2032-mm (80-in.) tread setting and 419-mm (16.5-in.) front and rear tracks: 6.78 m
22.2 ft
With 3048-mm (120-in.) tread setting and 610-mm (24-in.) front and rear tracks: 6.85 m
22.5 ft

Tracks

Mid-rollers Front: Two
Rear: Three
Track width Available: 419 mm
16.5 in.
457 mm
18 in.
609 mm
24 in.
762 mm
30 in.
Drive type Camso® 4500 and 6500 General Ag Series - reinforced drive lug technology
Tread spacing Available: 1930.4 mm
76 in.
2032 mm
80 in.
2235.2 mm
88 in.
3048 mm
120 in.

Transmission

Type Standard: e23 PowerShift with Efficiency Manager 40K, 40 km/h
24.9 mph
Optional: John Deere AutoPowr IVT 40K, 0.05-42 km/h
0.03-26 mph

Weight

Maximum ballast level 20,000 kg
44,100 lb
Base machine weight e23, 457-mm (18-in.) front/rear and 3048-mm (120-in.) tread: 19,600 kg
43,300 lb
Maximum permissible weight 24,000 kg
53,000 lb

Additional information

Date collected 12 January 2022